On the influence of Machining parameters on the surface characteristics and material removal rate of Epoxy/Bn Nanocomposites

H.Al-Mutairi, T.; .A. Abd-Allah, S.; S.S.Habib, S.; . H.Al-Mutairi, T.; .S.Habib, S.

doi:10.21608/erjsh.2020.242109

On the influence of Machining parameters on the surface characteristics and material removal rate of Epoxy/Bn Nanocomposites

Document Type : Research articles

Authors

¹ Mechanical Engineering Department, Shoubra Faculty of Engineering, Benha University, Cairo, Egypt.

² In the present investigation, the influence of machining parameters during turning on the surface characteristics and material removal rate of epoxy/BN nanocomposites. The influence of machining parameters, typically, the feed rate, cutting speed, and depth-of-cut on the surface characteristics of epoxy/BN nanocomposite workpieces, typically, the surface roughness (Ra) and roundness error (Er) were evaluated. Moreover, the influence of the aforementioned machining parameters on the material removal rate of epoxy/BN nanocomposites was investigated. Empirical regression models were developed to estimate influences of the aforementioned independent variables on the MRR, Ra and Er.

10.21608/erjsh.2020.242109

Abstract

In the present investigation, the influence of machining parameters during turning on the surface characteristics and material removal rate of epoxy/BN nanocomposites. The influence of machining parameters, typically, the feed rate, cutting speed, and depth-of-cut on the surface characteristics of epoxy/BN nanocomposite workpieces, typically, the surface roughness (Ra) and roundness error (Er) were evaluated. Moreover, the influence of the aforementioned machining parameters on the material removal rate of epoxy/BN nanocomposites was investigated. Empirical regression models were developed to estimate influences of the aforementioned independent variables on the MRR, Ra and Er.